Press kit

An FPV drone sim for new and experienced pilots. Pick a stock drone or build your own from about a hundred parts, tune it in a Betaflight-style configurator, fly a field, a bando and a race track, and watch every flight back.

Flying

Fly Acro, Angle and Horizon on the switches you choose. Rates, PIDs and modes work the Betaflight way, with a CLI to paste in your diff or copy one out. Pick a digital HD or an analog video feed, lay out the OSD with three profiles, and switch between the FPV and the chase camera. Plug in your radio over USB or use a gamepad; the setup maps your sticks and switches as you move them, in any stick mode.

Workbench

About a hundred parts: frames, motors, props, batteries, stacks, cameras, video and more. Build anything from a 65 mm whoop to a 5 inch freestyle quad, or start from one of four stock drones: a whoop, a cinewhoop, a race quad and a freestyle quad. Weight, thrust to weight, hover throttle and flight time update with every part you swap, and one key takes the build into the air. Save your builds and share them as short codes.

Spots

A field with a dirt track, a three storey bando, and a race track with 12 gates, lap times and splits against your best lap.

Replays

Every flight is recorded. Watch it back from your goggles, a chase cam or a free camera, scrub through it and slow it down.